250W to 2000W Module LED Football Stadium light

1, Item No: Square 250W to 2000W Module LED Football Stadium light (XX-FL-K)

2. Power: 250W 500W 750W 1000W 1250W 1500W 2000W

3. Input Voltage: AC 85-265V

4. LED Brand: OSRAM 3030 LED 

5-1, CCT-1: white,Warm white, Nature white

6, Lumens: 120lm/W

7. Material: Aluminum

8, Beam angle: 30 60 90 degrees

9. Waterproof grade: IP65

10, surface color: Black

11. Lifespan: 50,000 hours 

12, Dimension : See the below size chart

13, Cable length: 0.3meter, Can be customized different length

14, Certification: CE ROHS FCC

15, Warranty: 5 years

LED Football Stadium light can be up to 2000watt maximum power

LED Football Stadium light parameters 

LED Football Stadium light adopts UL listed driver or Meanwell drivers inside

LED Football Stadium light Philips & osram leds 3030

LED Football Stadium light PC lens with high light transmittance

LED Football Stadium light power up to 2000watt and more

LED Football Stadium light can be installed and used individually, or multiple lights can be combined and installed on a pole of more than 20m to form a high-pole lighting device. In addition to the beautiful appearance, centralized maintenance, and reduction of lamp poles and floor space, the biggest advantage of this device is its strong lighting function. When the light is projected from a high place, the space brightness of the environment is high, and the light coverage is large, giving people a feeling similar to daytime, so it has higher lighting quality and visual effects.

In order to meet the minimum safety performance requirements for outdoor use, the enclosure protection level of the LED Football Stadium light should be IP3 (open type). In order to improve the durability of lamps and reduce maintenance workload, people pay more and more attention to the development of closed-type LED Football Stadium light with high one-time investment costs, and their enclosure protection grade is IP65.

In order to further improve the light output ratio of lamps, the reflectors tend to use block plate reflectors that are conducive to reducing the light blocking of light sources and multi-focus reflectors that meet special lighting requirements; the surface treatment of the reflective surface tends to use new materials and new processes. to obtain a reflectance of over 96%.

In order to reduce the weight of lamps and reduce the consumption of metal materials, lamp housings will be developed in the direction of plastic housings with high temperature resistance, high mechanical strength and anti-aging.