60LEDs per meter Cool warm double white 5050 LED Strip Light

NOTE:

*All the Strip light were sold by roll (5 meters/ Every roll)

* Ship around the world  for Free in FREE SHIPPING Column

1, Item No: 60LEDs per meter CW And WW  5050 LED Strip Light,(XX SL-5050-60-CW+WW)

2. Power: 10W / Meter

3. Input Voltage: DC12V / DC 24V

4. LED Brand: SMD5050 LED

    60 LEDs/Meter

5, Color: CW, WW, CW+WW

6, Lumens: 50-55lm / LED (CW+WW LED)

7. Material: Flexible PCB+3M adhesive

8. PCB Wide: 10mm.

9, 5meters/ Roll

10, Cuttable: 12V version every 3LED,  24V version every 6LED

12, Waterproof grade: IP20(Non-waterproof) IP65, IP67. IP68 (Customized)

13. Lifespan: 50,000 hours 

14. Cuttable every 3LEDs 

15, Certification: CE ROHS FCC.

16, Warranty: 3 years.

double white 5050 LED Strip Light can be warm white and cool white in same leds

Lighting up effect of double white 5050 LED Strip Light

Usage of double white 5050 LED Strip Light

Installation & application for double white 5050 LED Strip Light

Notice for Maintanence

1. Anti-static: Since the LED is a static-sensitive component, if the anti-static measures are not taken care of when the double white 5050 LED Strip Light is being repaired, the LED will be burned out, resulting in losses. It should be noted that the electric soldering iron should use an anti-static soldering iron, and the maintenance personnel must also prepare anti-static measures (such as wearing an electrostatic ring and anti-static gloves, etc.).

2. Continuation of high temperature: The two main components of double white 5050 LED Strip Light are LED and FPC. If the FPC continues to be at high temperature or exceeds its acceptable level, the cover film of the FPC will be cracked, which will directly cause the LED strip to be scrapped. At the same time, LEDs cannot withstand high temperatures continuously, and their chips will be burned out by high temperatures after a long time of high temperature. Therefore, the electric soldering iron used in the maintenance of the double white 5050 LED Strip Light is a temperature-controlled electric soldering iron, which limits the measurement to a certain range and prevents arbitrary changes and settings. In addition, even so, it is also necessary to pay attention to the fact that the soldering iron cannot stop at the pin of the LED for more than 10 seconds during maintenance. If it exceeds a certain time, it is likely to burn the LED chip.

3. Short circuit: Many double white 5050 LED Strip Light do not light up because there is a short circuit at the foot. Before repairing, the real reason for the lack of light must be investigated. Otherwise, after rashly changing the LED that is not bright, the chip that forms the LED will be broken down by short-circuit DC when the power is recycled again. Therefore, in advance, we must first find the real reason for the lack of light, and we can only achieve twice the result with half the effort.