7W 12W Round version LED courtyard wall lamp

1, Item No: 7W 12W Round version LED courtyard wall lamp (XX-WAL-OC07)

2. Power: 7W 12W 

3. Input Voltage: AC 85-265V, DC 24V

4. LED Brand: San'an SMD LED

5-1, CCT-1: white,Warm white, Nature white

5-2, Others Color: Yellow Red Green Blue

6, Lumens: 80lm/W

7. Material: Aluminum,

8. Waterproof grade: IP65

9, surface color:  Black

10. Lifespan: 50,000 hours 

11, Dimension : See the below size chart

12, Cable length: 0.3meter, Can be customized different length

13, Certification: CE ROHS FCC

14, Warranty: 3 years

LED courtyard wall lamp different Version for selections

LED courtyard wall lamp has soft light with lower consumption

LED courtyard wall lamp wilky white PC light transmitter

LED courtyard wall lamp light up and ligth off comparison

LED courtyard wall lamp detailed parameters 

The installation method of the LED courtyard wall lamp is relatively simple. After the position is determined, the main thing is to fix the lamp holder of the LED courtyard wall lamp, and the LED courtyard wall lamp is often fixed on the wall by the method of embedded parts or punching.

gluing construction

There are many methods of gluing, but the following are commonly used.

1. Brush method

Applying the adhesive to the bonding surface with a brush is the easiest and most commonly used method. This method is suitable for single or small batch production and construction.

2. spray method

For low viscosity adhesives, it can be sprayed with an ordinary paint spray gun. For those high viscosity adhesives with short pot life and difficult cleaning, spray guns from Burt from the reinforced plastics industry can be used. The advantages of the spraying method are that the glue is applied evenly and the work efficiency is high;

3. artesian method

The rain-type automatic device is adopted. This method is very suitable for flat plate-shaped parts, with high ergonomics and suitable for mass production. In order to prevent the glue from clogging the nozzle, the glue used must have the proper viscosity and fluidity.

4. Roller coating

The lower half of the rubber roller is immersed in the glue, and the upper half is exposed to the outside directly or indirectly through the printing roller to contact the working surface. In order to achieve different gluing effects, different grooves and patterns can be made on the wheat surface of the rubber roller, and the amount of gluing can also be controlled by changing the pressure of the rubber roller or using a scraper. Cots can be made of rubber, wood, felt or metal.

5. Scratch coating

For high-viscosity limb-like and paste-like adhesives and for bonding parts such as floors, glue can be used for gluing. The rubber sheet can be made of 1-1.5mm thick elastic steel plate, rigid PVC board and other materials.

6. Other coating methods

Such as dip coating method, glue injection method, etc.